dmesg - 2011-12-21 06:41
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-13-server (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #22~lucid1-Ubuntu SMP Thu Nov 3 14:46:55 UTC 2011 (Ubuntu 3.0.0-13.22~lucid1-server 3.0.6)
[ 0.000000] Command line: root=/dev/vda1 ro console=ttyS0,115200n8 console=tty1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fffd000 (usable)
[ 0.000000] BIOS-e820: 000000003fffd000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Joyent SmartDC HVM, BIOS Bochs 01/01/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x3fffd max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000fdbe0] fdbe0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-000000003fffd000
[ 0.000000] 0000000000 - 003fe00000 page 2M
[ 0.000000] 003fe00000 - 003fffd000 page 4k
[ 0.000000] kernel direct mapping tables up to 3fffd000 @ 3fffa000-3fffd000
[ 0.000000] RAMDISK: 37726000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fdb90 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 000000003fffdc00 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 000000003ffffe30 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 000000003fffde00 01FB7 (v01 BXPC BXDSDT 00000001 INTL 20090123)
[ 0.000000] ACPI: FACS 000000003ffffdc0 00040
[ 0.000000] ACPI: SSDT 000000003fffdd60 0009E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 000000003fffdc80 00072 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 000000003fffdc40 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003fffd000
[ 0.000000] Initmem setup node 0 0000000000000000-000000003fffd000
[ 0.000000] NODE_DATA [000000003fff5000 - 000000003fff9fff]
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003e600000-ffff88003f3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x0003fffd
[ 0.000000] On node 0 totalpages: 262024
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3918 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3528 pages used for memmap
[ 0.000000] DMA32 zone: 254517 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:beffc000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88003fc00000 s79680 r8192 d22720 u2097152
[ 0.000000] pcpu-alloc: s79680 r8192 d22720 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258435
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/vda1 ro console=ttyS0,115200n8 console=tty1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1008940k/1048564k available (6170k kernel code, 468k absent, 39156k reserved, 6950k data, 904k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:256 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty1] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2399.783 MHz processor.
[ 0.072007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.56 BogoMIPS (lpj=9599132)
[ 0.077864] pid_max: default: 32768 minimum: 301
[ 0.080036] Security Framework initialized
[ 0.082401] AppArmor: AppArmor initialized
[ 0.084010] Yama: becoming mindful.
[ 0.088098] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.091678] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.092442] Mount-cache hash table entries: 256
[ 0.096220] Initializing cgroup subsys cpuacct
[ 0.100016] Initializing cgroup subsys memory
[ 0.102360] Initializing cgroup subsys devices
[ 0.104013] Initializing cgroup subsys freezer
[ 0.106194] Initializing cgroup subsys net_cls
[ 0.108013] Initializing cgroup subsys blkio
[ 0.112037] Initializing cgroup subsys perf_event
[ 0.114707] Disabled fast string operations
[ 0.116031] mce: CPU supports 10 MCE banks
[ 0.120177] SMP alternatives: switching to UP code
[ 0.155224] Freeing SMP alternatives: 24k freed
[ 0.156024] ACPI: Core revision 20110413
[ 0.160873] ftrace: allocating 24641 entries in 97 pages
[ 0.172791] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.215602] CPU0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
[ 0.220024] Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.
[ 0.228286] Brought up 1 CPUs
[ 0.232019] Total of 1 processors activated (4799.56 BogoMIPS).
[ 0.236709] devtmpfs: initialized
[ 0.244557] print_constraints: dummy:
[ 0.247513] Time: 6:16:03 Date: 12/21/11
[ 0.248114] NET: Registered protocol family 16
[ 0.252185] ACPI: bus type pci registered
[ 0.256245] PCI: Using configuration type 1 for base access
[ 0.261468] bio: create slab at 0
[ 0.265417] ACPI: EC: Look up EC in DSDT
[ 0.268515] ACPI: Interpreter enabled
[ 0.270860] ACPI: (supports S0 S3 S4 S5)
[ 0.274823] ACPI: Using IOAPIC for interrupt routing
[ 0.283076] ACPI: No dock devices found.
[ 0.284022] HEST: Table not found.
[ 0.286231] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.292055] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.296097] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.296100] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.296102] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.296104] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
[ 0.296184] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[ 0.296848] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[ 0.297835] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
[ 0.298437] pci 0000:00:01.1: reg 20: [io 0xc000-0xc00f]
[ 0.298849] pci 0000:00:01.2: [8086:7020] type 0 class 0x000c03
[ 0.299466] pci 0000:00:01.2: reg 20: [io 0xc020-0xc03f]
[ 0.300226] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
[ 0.301113] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.304043] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.308077] pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300
[ 0.316121] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf1ffffff pref]
[ 0.319486] pci 0000:00:02.0: reg 14: [mem 0xf2000000-0xf2000fff]
[ 0.338634] pci 0000:00:02.0: reg 30: [mem 0xf2010000-0xf201ffff pref]
[ 0.339154] pci 0000:00:03.0: [1af4:1000] type 0 class 0x000200
[ 0.340299] pci 0000:00:03.0: reg 10: [io 0xc040-0xc05f]
[ 0.340444] pci 0000:00:03.0: reg 14: [mem 0xf2020000-0xf2020fff]
[ 0.341285] pci 0000:00:03.0: reg 30: [mem 0xf2030000-0xf203ffff pref]
[ 0.341779] pci 0000:00:04.0: [1af4:1000] type 0 class 0x000200
[ 0.342034] pci 0000:00:04.0: reg 10: [io 0xc060-0xc07f]
[ 0.342173] pci 0000:00:04.0: reg 14: [mem 0xf2040000-0xf2040fff]
[ 0.342904] pci 0000:00:04.0: reg 30: [mem 0xf2050000-0xf205ffff pref]
[ 0.343331] pci 0000:00:05.0: [1af4:1001] type 0 class 0x000100
[ 0.343567] pci 0000:00:05.0: reg 10: [io 0xc080-0xc0bf]
[ 0.343701] pci 0000:00:05.0: reg 14: [mem 0xf2060000-0xf2060fff]
[ 0.345138] pci 0000:00:06.0: [1af4:1001] type 0 class 0x000100
[ 0.345381] pci 0000:00:06.0: reg 10: [io 0xc0c0-0xc0ff]
[ 0.345527] pci 0000:00:06.0: reg 14: [mem 0xf2061000-0xf2061fff]
[ 0.346968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.347575] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.353540] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.357944] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.362572] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.366581] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.372064] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
[ 0.376529] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.380029] vgaarb: loaded
[ 0.381558] vgaarb: bridge control possible 0000:00:02.0
[ 0.384436] SCSI subsystem initialized
[ 0.386590] libata version 3.00 loaded.
[ 0.386701] usbcore: registered new interface driver usbfs
[ 0.388057] usbcore: registered new interface driver hub
[ 0.392089] usbcore: registered new device driver usb
[ 0.394868] PCI: Using ACPI for IRQ routing
[ 0.396039] PCI: pci_cache_line_size set to 64 bytes
[ 0.396510] reserve RAM buffer: 000000000009bc00 - 000000000009ffff
[ 0.396519] reserve RAM buffer: 000000003fffd000 - 000000003fffffff
[ 0.396896] NetLabel: Initializing
[ 0.400035] NetLabel: domain hash size = 128
[ 0.402128] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.404054] NetLabel: unlabeled traffic allowed by default
[ 0.408154] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.412082] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.416030] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.428169] Switching to clocksource hpet
[ 0.430179] Switched to NOHz mode on CPU #0
[ 0.440763] AppArmor: AppArmor Filesystem Enabled
[ 0.443198] pnp: PnP ACPI init
[ 0.445006] ACPI: bus type pnp registered
[ 0.447053] pnp 00:00: [bus 00-ff]
[ 0.447056] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.447058] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.447059] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.447061] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.447063] pnp 00:00: [mem 0xe0000000-0xfebfffff window]
[ 0.447107] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.447145] pnp 00:01: [io 0x0070-0x0071]
[ 0.447202] pnp 00:01: [irq 8]
[ 0.447204] pnp 00:01: [io 0x0072-0x0077]
[ 0.447227] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.447259] pnp 00:02: [io 0x0060]
[ 0.447260] pnp 00:02: [io 0x0064]
[ 0.447285] pnp 00:02: [irq 1]
[ 0.447317] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.447375] pnp 00:03: [irq 12]
[ 0.447400] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.447420] pnp 00:04: [io 0x03f2-0x03f5]
[ 0.447422] pnp 00:04: [io 0x03f7]
[ 0.447445] pnp 00:04: [irq 6]
[ 0.447447] pnp 00:04: [dma 2]
[ 0.447470] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.447585] pnp 00:05: [io 0x03f8-0x03ff]
[ 0.447619] pnp 00:05: [irq 4]
[ 0.447653] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.447732] pnp 00:06: [io 0x02f8-0x02ff]
[ 0.447756] pnp 00:06: [irq 3]
[ 0.447787] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.447804] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[ 0.447844] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.448130] pnp: PnP ACPI: found 8 devices
[ 0.450138] ACPI: ACPI bus type pnp unregistered
[ 0.459223] PCI: max bus depth: 0 pci_try_num: 1
[ 0.459238] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.459240] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffff]
[ 0.459309] NET: Registered protocol family 2
[ 0.462003] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.466116] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.471795] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.476224] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.479379] TCP reno registered
[ 0.481300] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.484825] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.487675] NET: Registered protocol family 1
[ 0.489893] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.492636] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.495229] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.498155] pci 0000:00:02.0: Boot video device
[ 0.498244] PCI: CLS 0 bytes, default 64
[ 0.498793] Trying to unpack rootfs image as initramfs...
[ 0.504591] audit: initializing netlink socket (disabled)
[ 0.507011] type=2000 audit(1324448163.504:1): initialized
[ 0.570858] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.584839] VFS: Disk quotas dquot_6.5.2
[ 0.587323] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.596322] fuse init (API version 7.16)
[ 0.598553] msgmni has been set to 1970
[ 0.616238] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.624134] io scheduler noop registered
[ 0.626406] io scheduler deadline registered (default)
[ 0.629592] io scheduler cfq registered
[ 0.640694] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.643296] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.646679] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.650498] ACPI: Power Button [PWRF]
[ 0.652849] ACPI: acpi_idle registered with cpuidle
[ 0.681150] ERST: Table is not found!
[ 0.683676] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.686448] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
[ 0.690498] virtio-pci 0000:00:03.0: setting latency timer to 64
[ 0.700265] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 0.702805] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, high) -> IRQ 10
[ 0.707400] virtio-pci 0000:00:04.0: setting latency timer to 64
[ 0.716401] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.718984] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[ 0.723153] virtio-pci 0000:00:05.0: setting latency timer to 64
[ 0.728441] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.731019] virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, high) -> IRQ 11
[ 0.735106] virtio-pci 0000:00:06.0: setting latency timer to 64
[ 0.771646] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.807702] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.847052] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.885365] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.889106] Linux agpgart interface v0.103
[ 0.893602] brd: module loaded
[ 0.896583] loop: module loaded
[ 0.899215] virtio-pci 0000:00:05.0: irq 40 for MSI/MSI-X
[ 0.899263] virtio-pci 0000:00:05.0: irq 41 for MSI/MSI-X
[ 1.041350] Freeing initrd memory: 9000k freed
[ 1.046085] vda: vda1
[ 1.048307] virtio-pci 0000:00:06.0: irq 42 for MSI/MSI-X
[ 1.048357] virtio-pci 0000:00:06.0: irq 43 for MSI/MSI-X
[ 1.049418] vdb: vdb1
[ 1.051349] ata_piix 0000:00:01.1: version 2.13
[ 1.051530] ata_piix 0000:00:01.1: setting latency timer to 64
[ 1.052221] scsi0 : ata_piix
[ 1.054105] scsi1 : ata_piix
[ 1.055860] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
[ 1.059669] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
[ 1.063319] Fixed MDIO Bus: probed
[ 1.065534] PPP generic driver version 2.4.2
[ 1.067953] tun: Universal TUN/TAP device driver, 1.6
[ 1.070804] tun: (C) 1999-2004 Max Krasnyansky
[ 1.074757] virtio-pci 0000:00:03.0: irq 44 for MSI/MSI-X
[ 1.074801] virtio-pci 0000:00:03.0: irq 45 for MSI/MSI-X
[ 1.074839] virtio-pci 0000:00:03.0: irq 46 for MSI/MSI-X
[ 1.076398] virtio-pci 0000:00:04.0: irq 47 for MSI/MSI-X
[ 1.076466] virtio-pci 0000:00:04.0: irq 48 for MSI/MSI-X
[ 1.076510] virtio-pci 0000:00:04.0: irq 49 for MSI/MSI-X
[ 1.078337] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.081485] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.084279] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.087656] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, high) -> IRQ 10
[ 1.092581] uhci_hcd 0000:00:01.2: setting latency timer to 64
[ 1.092615] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 1.095347] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 1.099280] uhci_hcd 0000:00:01.2: irq 10, io base 0x0000c020
[ 1.102930] hub 1-0:1.0: USB hub found
[ 1.200435] hub 1-0:1.0: 2 ports detected
[ 1.203312] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.210045] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.213100] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.216364] mousedev: PS/2 mouse device common for all mice
[ 1.220310] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.224624] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.228758] device-mapper: uevent: version 1.0.3
[ 1.231970] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 1.237628] cpuidle: using governor ladder
[ 1.240825] cpuidle: using governor menu
[ 1.243862] EFI Variables Facility v0.08 2004-May-17
[ 1.247769] TCP cubic registered
[ 1.250522] NET: Registered protocol family 10
[ 1.254928] NET: Registered protocol family 17
[ 1.258302] Registering the dns_resolver key type
[ 1.261766] PM: Hibernation image not present or could not be loaded.
[ 1.261782] registered taskstats version 1
[ 1.267304] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.282645] Magic number: 7:967:266
[ 1.285521] rtc_cmos 00:01: setting system clock to 2011-12-21 06:16:04 UTC (1324448164)
[ 1.290311] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.293969] EDD information not available.
[ 1.429560] ata2.01: NODEV after polling detection
[ 1.430331] ata2.00: ATAPI: QEMU DVD-ROM, 0.14.1, max UDMA/100
[ 1.434806] ata2.00: configured for MWDMA2
[ 1.438454] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 0.14 PQ: 0 ANSI: 5
[ 1.445170] sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
[ 1.448283] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.451386] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.451434] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.456462] Freeing unused kernel memory: 904k freed
[ 1.460281] Write protecting the kernel read-only data: 12288k
[ 1.471317] Freeing unused kernel memory: 2004k freed
[ 1.487269] Freeing unused kernel memory: 1400k freed
[ 1.496839] Refined TSC clocksource calibration: 2400.069 MHz.
[ 1.502619] Switching to clocksource tsc
[ 1.540848] udev: starting version 151
[ 1.548089] usb 1-1: new full speed USB device number 2 using uhci_hcd
[ 1.564117] udevd (78): /proc/78/oom_adj is deprecated, please use /proc/78/oom_score_adj instead.
[ 1.736556] FDC 0 is a S82078B
[ 1.985072] input: QEMU 0.14.1 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input2
[ 1.993996] generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.14.1 QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[ 2.005972] usbcore: registered new interface driver usbhid
[ 2.011190] usbhid: USB HID core driver
[ 6.780962] EXT3-fs: barriers not enabled
[ 6.785510] kjournald starting. Commit interval 5 seconds
[ 6.791164] EXT3-fs (vda1): mounted filesystem with ordered data mode
[ 7.313457] udev: starting version 151
[ 7.338043] EXT3-fs (vda1): using internal journal
[ 7.347684] lp: driver loaded but no devices found
[ 7.462508] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
[ 7.540445] EXT4-fs (vdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.252465] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 18.240082] eth0: no IPv6 routers present
[ 18.504039] eth1: no IPv6 routers present